Scanair Air cooled water chillers are manufactured in india with small chilled water tank with evaporator and process pump, refrigeration system to cool the water altogether fitted in to one bracket the chilled water at decided temperature will be pumped in to the process in a closed loop system the heat will be absorbed by the chilled water and come into the tank.  It will be recirculated for various applications as detailed given below. Air cooled water chillers will maintained Temperature range from 5˚ C To 30˚ C  ± 1˚ C. capacity from 450 Kcal/Hr to 150000 Kcal/Hr with 30 LPM to 600 LPM different flow capacity. Water or other liquid from the chiller is pumped through process  or industrial equipment specially for Plastic Injection Molding, Pet Blowing, Aluminum Die Casting, Laser Welding,  Ultra sonic Welding, Induction  Hardening Machine Condenser cooling, Diffusion pump, Machine Tool application, Plasma etching, etc., those applications need to be cooled in presided Temperature to reduce the cycle time and product quality, productivity.  Scanair chillers are designed new generation styled and built esthetically to match the modern trend in equipment manufacturing.

What is the difference between and air cooled chiller and a water cooled chiller?

These two terms have to do with how the chillers refrigeration system gets rid of the heat it removed from the water process loop. In the case of an air cooled chiller heat is rejected to the ambient air in the case of a water-cooled chiller heat is rejected to some other water source such as a cooling tower water system.

Why should you purchase and air cooled chiller?

If the facility does not have a ready water source such as a cooling tower water system air cooled chiller is the easy way to go for installation the chiller itself is a little more expensive. However, with respect to the total system it is much less because you don’t need anything else to carry the heat rejects other than air.

Scanair Water chillers will maintain the temperature range from 5˚ C To 30˚ C ± 1˚ C capacity from 450 Kcal/Hr to 150000 Kcal/Hr, 3 LPM to 650 LPM with different flow capacity. Water or other liquid from the chiller is pumped through process or industrial equipment specially for the plastics industry uses process chillers to reduce cycle times in injection molding and blow molding by regulating temperatures.

Laser welding chillers

The most common way of permanently joining metal parts where heat is applied to permanently fuse pieces of metal together. For some pieces of welding equipment, heat needs to be removed from the welding heat to preserve the integrity of parts of the head.

Depending on the heat removal a Scanair portable chiller series is a good choice or since precise control and can provide sufficient cooling. Lots of flow at high heat loads. Small TIG or MIG welders consume 2-3 kilowatts. Precise temperature control is not important.

 Plastic Injection Molding  chillers

When metals are cut the friction causes heat to build-up in the recirculated cutting oil. By controlling the cutting fluid temperature greater accuracy can be achieved because thermal expansion and contraction of the material is eliminated. Always use a liquid heat exchanger with one path for the cutting oil and the other path for the chiller.

Scanair Chillers are ideal and most suitable for a wide spectrum of applications in industries like, Plastic Injection Molding and extrusion, Pet Blowing, Film Blowing HDPE, LDPE, Pouch sealing Machines, Lamination Machines, Aluminum Die Casting, Laser Welding, Ultra sonic Welding, Induction Hardening Machine etc., those applications need to be cooled to a precise temperature to reduce the cycle time and product quality, productivity.  Scanair chillers are designed new generation styled.